-
This weekend not much done but installed the filter mount and plumbed the oil system and made a mount for the Accusump electric valve and pressure switch.
IMG_2511.jpg
IMG_2510.jpg
IMG_2512.jpg
-
Post Thanks / Like - 0 Thanks, 2 Likes
-
Good weekend, converted the 2011 6 speed to front wheel only, replaced axle seals and outed on the shift linkage. Mechie can you check it. I also built custom mounts for the Oil Control Valve(Killer Bee), the Air Oil separator IAG and he AccuSump electronic solenoid valve. I also mounted an overflow tank in the front that should never see overflow with 2.0 bar radiator and 1.3 intercooler radiator. The overflow will be in the rear. Lastly I mounted a Mishimoto after engine coolant tank. Emergency brake and plumbing all the brakes next.
364F4792-E1FF-49F0-A8FF-2B6418C23095.jpg
5AE7FC19-126B-4A40-9D11-4684F2BE904B.jpg
1DEA3B27-20A9-4838-AEE5-CC535C7E8575.jpg
21FA305B-1621-4993-9F0B-110552D0AC60.jpeg
E976E592-9DD4-4352-B5B1-28C0BD462ED0.jpeg
1290A8BC-EFAC-4A23-A19E-7F91AF7A4706.jpeg
670DA5C5-3922-481E-8DCD-F30957702A3E.jpg
336F325C-1B6A-4A2E-97C9-E9A50CA55877.jpeg
2CA202C9-FE00-4108-9DDC-230DD7C2D761.jpeg
-
Post Thanks / Like - 1 Thanks, 5 Likes
DSR-3 thanked for this post
Thanks: 
Likes: 
Reply With Quote