I ordered an after market coolant expansion tank and some other parts to hopefully fix my coolant-bleeding/burping problem. I think I may have a way to add another 5/16" blowoff hose to the radiator like on the turbo models. I figure now is the time to install my heater and route my heater hoses. Here is my heater. I completely copied TheHelixx's thread on this...



Here are the hose mock-ups



Initially I was going to run the hoses over the engine like this:



But I'm thinking keeping them low to avoid air trapping and overheat problems is advisable. Like this???



If anybody has any nifty ideas for the best way to route these hoses feel free to chime in.