Quote Originally Posted by blomb11 View Post
I am a bit confused the R instructions doesn't specify what type of bolt is used on the rear bushing on the front LCA. Is this supposed to be a 1/2" or 5/8" bolt? The washer stack it says to use are 5/8, but in the pictures it looks like a 1/2" bolt. The holes in the frame tabs are ~0.58" so it does not seem like a 5/8" bolt is supposed to go there, but I want to ask to make sure. I have it mocked up right now with 1/2" bolts from the supplied hardware, but they seem too long so I might buy a shorter bolt if it is supposed to be 1/2.
Believe it or not it's Metric for the OEM size donor bolt!

IMHO switch all the crappy FF supplied bolts for AN bolts and OEM suspension bolts.

See my build thread starting at Post #344.

https://thefactoryfiveforum.com/show...l=1#post458587