Front upper shock spacers

[CobraDreaming]

Anyone happen to have these spacers hanging around? MKII era.

Removed to inspect something. Got sidetracked a bit and now they have disappeared into the ether.

spacers.jpg

[Jeff Kleiner]

They're nothing special. You can just cut them from some .5 ID x .75 OD tubing.

Jeff

[CobraDreaming]

They're nothing special. You can just cut them from some .5 ID x .75 OD tubing.

Jeff

Thanks Jeff. May give that a go but have nothing to really give them a straight cut. Probably end up a few degrees off

[Norm B]

If you can’t cut them perfectly straight then, cut them a little long and file to fit.

[CraigS]

You can also stack up washers. There is no tendency for the coil over to twist so washers will not cause any binding. If you want something a little nicer go to jegs.
https://www.jegs.com/webapp/wcs/stor...0002&langId=-1
Scroll through to pick 1/2" ID in various lengths. If you can't get a perfect length the frame ears will bend pretty easily.

[CobraDreaming]

Thanks Craig. Good find.