Quote Originally Posted by RM1SepEx View Post
see photo 1 above:

your rear lower LCA bushings are mounted incorrectly, the side with the little "wiggle" is supposed to be down, the flat side on the top, swap and flip

there is a small funky shaped block off plate to go between the firewall and the master cylinder
Dan thanks for taking the time to review my pics and comment! There has been many conflicting posts/information about the installation of the LCA's that I temporarily bolted them in place until I felt the issue was finalized. So today I picked up some nuts and bolts, flipped them around, and bottled them in. I also painted the cover plate for the master cylinder with bed liner paint and installed. The plate did require some cutting to clear the top right master cylinder bracket bolt, FYI.

image.jpg

image.jpg

I installed the front sway bar also. My wheels are on island now, hopefully delivery tomorrow. If my axle parts arrive this week I plan on having the baby stand on its own feet this weekend!!