Quote Originally Posted by Aloha818 View Post
Dan thanks for taking the time to review my pics and comment! There has been many conflicting posts/information about the installation of the LCA's that I temporarily bolted them in place until I felt the issue was finalized. So today I picked up some nuts and bolts, flipped them around, and bottled them in. I also painted the cover plate for the master cylinder with bed liner paint and installed. The plate did require some cutting to clear the top right master cylinder bracket bolt, FYI.
If you followed my thread you can see that I spent a ton of time working out the LCA bushing issues! :-) I tried to get the manual straightened out but to no avail, there are still loads of conflicting photos and directions in the manual. :-(