Eaton's 818C Build - Power Window Modifications

[J R Jones]

Is the rear rim bent? Something is causing that bad camber angle. Was it like that before?

I agree with John, however if you rolled the car you would see wobble. With similar thinking in the last year, a track car broke the rear axle flange off due to the nut loosening and metal fatigue. Look for axle flange run-out too.
jim

[Mark Eaton]

I agree with John, however if you rolled the car you would see wobble. With similar thinking in the last year, a track car broke the rear axle flange off due to the nut loosening and metal fatigue. Look for axle flange run-out too.
jim

Thanks, this gives me a reason to purchase a dial indicator!

[Mark Eaton]

This is a short video of the catywhampous left rear wheel now in the right front and is spinning pretty nicely

https://youtube.com/shorts/IN3dOIXzOVQ

Here is the rotor

https://youtube.com/shorts/XygCJ2Rrfgw

and the hub

https://youtu.be/SN43JpKJ_KY